Home > Industrial Services > New Sales > Heidenhain

Heidenhain Repair Services

Heidenhain manufactures a wide range of electronic devices used in all sorts of industries, and each one requires a careful, trained hand to properly repair. Browse our selection of Heidenhain models we offer repair services for and then give us a call for a complete quote. Were so confident in our abilities to repair your Heidenhain devices that each repair we complete is done with an 18-month in-service warranty and a 10% price guarantee. Call us today to get started.

ACANTO Length Gauge (12 and 30mm)
ACANTO is HEIDENHAIN`s new absolute, ultra high accuracy length gauge, which can be ordered in either 12mm or 30mm measuring lengths.
CALL FOR QUOTE
Accuracy of Feed Axes
Is thermal expansion relevant.q. In the total error budget of a machine tool the positioning error values of the feed axes play a critical role.
CALL FOR QUOTE

CT 2501
The CERTO CT 2501 is a Ultra High Accuracy Length Gauge which features a measuring range of 25 mm.
CALL FOR QUOTE

CT 2502
The CERTO CT 2502 is a Ultra High Accuracy Length Gauge which features a measuring range of 25 mm.
CALL FOR QUOTE

CT 6001
The CERTO CT 6001 is a Ultra High Accuracy Length Gauge which features a measuring range of 60 mm.
CALL FOR QUOTE

CT 6002
The CERTO CT 6002 is a Ultra High Accuracy Length Gauge which features a measuring range of 60 mm.
CALL FOR QUOTE

DBB 110 Ballbar Discontinued
The DBB Double Ball Bar is a telescoping double-ball-bar linear encoder for performing circular interpolation tests with large radii to inspect primarily the machine tool geometry
CALL FOR QUOTE

ECN 113
Incremental rotary encoder for large shafts with integral bearing and mounted stator coupling with 1 Vpp and EnDat output and IP 64 protection
CALL FOR QUOTE

ECN 1313
Compact absolute rotary taper shaft encoder with integral bearing and mounted stator coupling with 1Vpp and EnDat output and IP 40 protection
CALL FOR QUOTE

ECN 413
Compact absolute rotary encoder with integral bearing and mounted stator coupling with 1Vpp and EnDat or SSI output and IP 64 protection
CALL FOR QUOTE

EQN 1325
Compact absolute rotary taper shaft encoder with integral bearing and mounted stator coupling with 1Vpp and EnDat output and IP 40 protection
CALL FOR QUOTE

EQN 425
Compact absolute rotary encoder with integral bearing and mounted stator coupling with 1Vpp and EnDat or SSI output and IP 64 protection
CALL FOR QUOTE

ERA 180 Discontinued
Exposed angle encoder without integral bearing for measuring steps 0.005 to 0.0005 with 1Vpp Output
CALL FOR QUOTE

ERA 4280C (20um)
Exposed modular angle encoder without integral bearing for measuring steps 0.005 to 0.0005 with 1Vpp Output. 20um grading period
CALL FOR QUOTE

ERA 4480
Exposed angle encoder without integral bearing for measuring steps 0.005 to 0.0005 with 1Vpp Output. Mechanically compatible with ERA180
CALL FOR QUOTE

ERA 4480C (40um)
Exposed modular angle encoder without integral bearing for measuring steps 0.005 to 0.0005 with 1Vpp Output. 20um grading period
CALL FOR QUOTE

ERA 4880C (80um)
Exposed modular angle encoder without integral bearing for measuring steps 0.005 to 0.0005 with 1Vpp Output. 20um grading period
CALL FOR QUOTE

ERA 780 / 780C
Exposed angle encoder without integral bearing for high speed measuring steps 0.001 to 0.0001 with 1Vpp Output
CALL FOR QUOTE

ERA 880 / 880C
Exposed angle encoder without integral bearing for measuring steps 0.001 to 0.0001 with 1Vpp Output
CALL FOR QUOTE

ERM 120 Discontinued
Exposed incremental rotary encoder without integral bearing with 5v TTL Quadrature output and IP 66 protection
CALL FOR QUOTE

ERM 180 Discontinued
Exposed incremental rotary encoder without integral bearing with 1Vpp output and IP 66 protection
CALL FOR QUOTE

ERM 220
The robust ERM modular magnetic encoders are especially suited for use in production machines with accuracies between +/-4" and +/-14".
CALL FOR QUOTE

ERM 280
The robust ERM modular magnetic encoders are especially suited for use in production machines with accuracies between +/-4` and +/-14`.
CALL FOR QUOTE

ERN 1020
Miniature incremental rotary encoder with integral bearing and mounted stator coupling with 5v TTL Quadrature output and IP 64 protection
CALL FOR QUOTE

ERN 1030
Miniature incremental rotary encoder with integral bearing and mounted stator coupling with 10v to 30v HTL Quadrature output and IP 64 protection
CALL FOR QUOTE

ERN 1080
Miniature incremental rotary encoder with integral bearing and mounted stator coupling with 1Vpp output and IP 64 protection
CALL FOR QUOTE

ERN 1085
Miniature incremental rotary encoder with integral bearing and mounted stator coupling with 1Vpp output plus commutation signals and IP 64 protection
CALL FOR QUOTE

ERN 1120
Miniature incremental rotary encoder with integral bearing and mounted stator coupling with 5v TTL Quadrature output and IP 40 protection
CALL FOR QUOTE

ERN 1180
Miniature incremental rotary encoder with integral bearing and mounted stator coupling with 1Vpp output and IP 40 protection
CALL FOR QUOTE

ERN 1185
Miniature incremental rotary encoder with integral bearing and mounted stator coupling with 1Vpp and commutation signal output and IP 40 protection
CALL FOR QUOTE

ERN 120
Incremental rotary encoder for large shafts with integral bearing and mounted stator coupling with 5v TTL Quadrature output and IP 64 protection
CALL FOR QUOTE

ERN 130
Incremental rotary encoder for large shafts with integral bearing and mounted stator coupling with 10v to 30v HTL Quadrature output and IP 64 protection
CALL FOR QUOTE

ERN 1321
Compact incremental rotary shaft encoder with integral bearing and mounted stator coupling with 5v TTL Quadrature output and IP 40 protection
CALL FOR QUOTE

ERN 1326
Compact incremental rotary shaft encoder with integral bearing and mounted stator coupling with 5v TTL Quadrature and commutation signal output and IP 40 protection
CALL FOR QUOTE

ERN 1381
Compact incremental rotary shaft encoder with integral bearing and mounted stator coupling with 1Vpp output and IP 40 protection
CALL FOR QUOTE

ERN 1387
Compact incremental rotary shaft encoder with integral bearing and mounted stator coupling with 1Vpp and commutation signal output and IP 40 protection
CALL FOR QUOTE

ERN 180
Incremental rotary encoder for large shafts with integral bearing and mounted stator coupling with 1 Vpp output and IP 64 protection
CALL FOR QUOTE

ERN 420
Compact incremental rotary encoder with integral bearing and mounted stator coupling with 5v TTL Quadrature output and IP 64 protection
CALL FOR QUOTE

ERN 430
Compact incremental rotary encoder with integral bearing and mounted stator coupling with 10v to 30v HTL Quadrature output and IP 64 protection
CALL FOR QUOTE

ERN 460
Compact incremental rotary encoder with integral bearing and mounted stator coupling with 5v TTL Quadrature output and IP 64 protection
CALL FOR QUOTE

ERN 480
Compact incremental rotary encoder with integral bearing and mounted stator coupling with 1Vpp output and IP 64 protection
CALL FOR QUOTE

ERN 620
Incremental modular rotary encoder with mounted stator coupling with 5v TTL Quadrature output and IP 40 protection.
CALL FOR QUOTE

ERN 630
Incremental modular rotary encoder with mounted stator coupling with 10v to 30v HTL Quadrature output and IP 40 protection.
CALL FOR QUOTE

ERN 650
Incremental modular rotary encoder with mounted stator coupling with 11uApp output and IP 40 protection.
CALL FOR QUOTE

ERN 680
Incremental modular rotary encoder with mounted stator coupling with 1Vpp output and IP 40 protection.
CALL FOR QUOTE

ERO 1225
Compact exposed incremental rotary encoder without integral bearing with 5v TTL Quadrature output
CALL FOR QUOTE

ERO 1285
Compact exposed incremental rotary encoder without integral bearing with 1Vpp output
CALL FOR QUOTE

ERO 1324
Exposed incremental rotary encoder for large shaft diameters without integral bearing with 5v TTL Quadrature output
CALL FOR QUOTE

ERO 1384
Exposed incremental rotary encoder for large shaft diameters without integral bearing with 1Vpp output
CALL FOR QUOTE

ERO 1420
Miniature exposed incremental rotary encoder without integral bearing
CALL FOR QUOTE

ERO 1421
Miniature exposed incremental rotary encoder without integral bearing with 5v TTL Quadrature output
CALL FOR QUOTE

ERO 1470
Miniature exposed incremental rotary encoder without integral bearing
CALL FOR QUOTE

ERO 1480
Miniature exposed incremental rotary encoder without integral bearing
CALL FOR QUOTE

ERO 1481
Miniature exposed incremental rotary encoder without integral bearing with 1Vpp output
CALL FOR QUOTE

ERO 725 Discontinued
Exposed angle encoder without integral bearing for measuring steps 0.005 to 0.0005 with 11uApp Output
CALL FOR QUOTE

ERO 785
ERO exposed angle encoder without integral bearing
CALL FOR QUOTE

Fadal Linear Scales
Inventory of discontinued custom HEIDENHAIN scales for Fadal machines
CALL FOR QUOTE

HEIDENHAIN Advanced ND780 DRO Packages
HEIDENHAIN Ultra Precision Mill, Lathe, Grinder and EDM Packages for 1 to 3 axes
CALL FOR QUOTE

HEIDENHAIN Basic ND522 DRO Package
HEIDENHAINs newest digital readout, the ND522/523 for mills, lathes, and grinders.
CALL FOR QUOTE

HR 130
Panel-mounted handwheel with ergonomic control knob
CALL FOR QUOTE

HR 150
Panel-mounted handwheel with ergonomic control knob
CALL FOR QUOTE

HR 410
Portable electronic handwheel with Keys for the selection of 5 axes
CALL FOR QUOTE

HR 420
Portable electronic handwheel with Display for operating mode, actual position value, programmed feed rate and spindle speed, error messages
CALL FOR QUOTE

HR 550FS Wireless Handwheel
New HR 550FS electronic handwheel from HEIDENHAIN is available for the iTNC 530
CALL FOR QUOTE

HRA 110
Handwheel adapter for connection of up to three HR 150 panel-mounted handwheels and two switches for axis selection and for selecting the interpolation factor.
CALL FOR QUOTE

Improving Machining Accuracy
Solutions for avoiding thermally induced dimensional deviations of workpieces have become more crucial than ever for the machine tool industry.
CALL FOR QUOTE

KGM 181
The KGM Grid Encoder is for performing circular interpolation tests with small radii and curved path tests, to inspect primarily the dynamic performance of a control
CALL FOR QUOTE

KGM 182
The KGM Grid Encoder is for performing circular interpolation tests with small radii and curved path tests, to inspect primarily the dynamic performance of a control
CALL FOR QUOTE

LB 302 / 302C Discontinued
Sealed Linear Encoders for Large Measuring Lengths with Analog Output
CALL FOR QUOTE

LB 382 / 382C
Sealed Linear Encoders for Large Measuring Lengths with 1Vpp or TTL Quadrature Output
CALL FOR QUOTE

LC 181 Discontinued
Sealed Absolute Linear Encoders
CALL FOR QUOTE

LC 182 Discontinued
High positioning accuracy and traversing speed through single-field scanning
CALL FOR QUOTE

LC 183
High positioning accuracy and traversing speed through single-field scanning
CALL FOR QUOTE

LC 191F Discontinued
High positioning accuracy and traversing speed through single-field scanning
CALL FOR QUOTE

LC 192F Discontinued
High positioning accuracy and traversing speed through single-field scanning
CALL FOR QUOTE

LC 192M Discontinued
High positioning accuracy and traversing speed through single-field scanning
CALL FOR QUOTE

LC 193F (Fanuc Interface)
High positioning accuracy and traversing speed through single-field scanning
CALL FOR QUOTE

LC 193M (Mitsubishi Interface)
High positioning accuracy and traversing speed through single-field scanning
CALL FOR QUOTE

LC 200
NEW LC 200 Absolute Linear Encoder for Machine Tools with Long Axes up 28 meters
CALL FOR QUOTE

LC 481 Discontinued
Absolute linear encoder for mesuring steps of 1 m to 0.1 m (0.000 05 in. to 0.000 005 in.)
CALL FOR QUOTE

LC 482 Discontinued
Absolute linear encoder for mesuring steps of 1 m to 0.1 m (0.000 05 in. to 0.000 005 in.)
CALL FOR QUOTE

LC 483
Absolute linear encoders for measuring steps to 0.1 m (resolution to 0.005 m. For limited installation space. High positioning accuracy and traversing speed through single-field scanning.
CALL FOR QUOTE

LC 493F (Fanuc Interface)
Absolute linear encoders for measuring steps to 0.1 m (resolution to 0.005 m).
CALL FOR QUOTE

LC 493M (Mitsubishi Interface)
Absolute linear encoders for measuring steps to 0.1 m (resolution to 0.005 m).
CALL FOR QUOTE

LF 103 / 103C Discontinued
Sealed Linear Encoders for Measuring Steps to 0.1 m with 11uApp Output
CALL FOR QUOTE

LF 183 / 183C
Sealed Linear Encoders for Measuring Steps to 0.1 m with 1Vpp Output.
CALL FOR QUOTE

LF 401 / LF 401C Discontinued
Slimline Sealed Linear Encoders for Measuring Steps to 0.1 m with 11uApp Output
CALL FOR QUOTE

LF 481 / 481C Discontinued
Slimline Sealed Linear Encoders for Measuring Steps to 0.1 m with 1Vpp Output
CALL FOR QUOTE

LF 483 / 483C
Slimline Sealed Linear Encoders for Measuring Steps to 0.1 m with 1Vpp Output
CALL FOR QUOTE

LIDA 101 / 101C Discontinued
Incremental linear encoders for high traversing speeds with 11uApp Output
CALL FOR QUOTE

LIDA 105 / 105C Discontinued
Incremental linear encoders for high traversing speeds and long traverses up to 30m with 11uApp Output
CALL FOR QUOTE

LIDA 107 / 107 C Discontinued
Incremental linear encoders for high traversing speeds and medium traverses up to 6m with 11uApp Output
CALL FOR QUOTE

LIDA 171 / 171C
Incremental linear encoders for high traversing speeds with 5v TTL Quadrature Output
CALL FOR QUOTE

LIDA 175 / 175C Discontinued
Incremental linear encoders for high traversing speeds and long traverses up to 30m with 5v TTL Quadrature Output
CALL FOR QUOTE

LIDA 177 / 177C Discontinued
Incremental linear encoder for measuring steps to 1m with 5v TTL Output
CALL FOR QUOTE

LIDA 181 / 181C Discontinued
Incremental linear encoders for high traversing speeds with 1 Vpp Output
CALL FOR QUOTE

LIDA 185 / 185C Discontinued
Incremental linear encoders for high traversing speeds and long traverses up to 30m with 1Vpp Output
CALL FOR QUOTE

LIDA 187 / 187 C Discontinued
Incremental linear encoders for high traversing speeds and medium traverses up to 6m with 1Vpp Output
CALL FOR QUOTE

LIDA 279/289
Steel tape incremental linear encoder with large mounting tolerance.
CALL FOR QUOTE

LIDA 473 / 473C
Incremental linear encoders for high traversing speeds with TTL Output
CALL FOR QUOTE

LIDA 475
Incremental linear encoders for limited installation space, high traversing speeds, and long traverses up to 30m with TTL Output
CALL FOR QUOTE

LIDA 477
Incremental linear encoders for limited installation space, high traversing speeds, and medium traverses up to 6m with 5v TTL Quadrature Output
CALL FOR QUOTE

LIDA 483 / 483C
Incremental linear encoders for high traversing speeds with 1 Vpp Output
CALL FOR QUOTE

LIDA 485
Incremental linear encoders for limited installation space, high traversing speeds, and long traverses up to 30m with 1Vpp Output
CALL FOR QUOTE

LIDA 487
Incremental linear encoders for limited installation space, high traversing speeds, and medium traverses up to 6m with 1Vpp Output
CALL FOR QUOTE

LIF 101 / 101C Discontinued
Incremental linear encoder for measuring steps of 1um to 0.1um with 11uApp Output
CALL FOR QUOTE

LIF 121 Discontinued
Incremental linear encoder for measuring steps of 1um to 0.1um with 5v TTL Quadrature Output and integrated 2x interpolation
CALL FOR QUOTE

LIF 171 Discontinued
Incremental linear encoder for measuring steps of 1um to 0.1um with 5v TTL Quadrature Output and integrated 5x or 10x interpolation
CALL FOR QUOTE

LIF 181 Discontinued
Incremental linear encoder for measuring steps of 1um to 0.1um with 1Vpp Output
CALL FOR QUOTE

LIF 471
Incremental exposed linear encoder for measuring steps of 1 m to 0.1 m
CALL FOR QUOTE

LIF 481
Incremental exposed linear encoder for measuring steps of 1 m to 0.1 m
CALL FOR QUOTE

LIM 571
Incremental linear encoder for measuring steps of 10 m. For limited installation space. For large measuring lengths. Magnetic scanning principle.
CALL FOR QUOTE

LIM 581
Incremental linear encoder for measuring steps of 10 m. For limited installation space. For large measuring lengths. Magnetic scanning principle.
CALL FOR QUOTE

LIP 372
Incremental linear encoder with Very High Accuracy
CALL FOR QUOTE

LIP 382
The LIP-382 linear encoder permits measuring steps as small as 1 nanometer
CALL FOR QUOTE

LIP 401 Discontinued
Incremental linear encoder with Very High Accuracy for limited installation space with 11uApp Output
CALL FOR QUOTE

LIP 471
Incremental linear encoder with Very High Accuracy for limited installation space with 5v TTL Quadrature Output
CALL FOR QUOTE

LIP 481
Incremental linear encoder with Very High Accuracy for limited installation space with 1Vpp Output
CALL FOR QUOTE

LIP 501 Discontinued
Incremental linear encoder with Very High Accuracy for large measuring lengths with 11uApp Output
CALL FOR QUOTE

LIP 571 / 571C
Incremental linear encoder with Very High Accuracy for large measuring lengths with 5v TTL Quadrature Output
CALL FOR QUOTE

LIP 581 / 581C
Incremental linear encoder with Very High Accuracy for large measuring lengths with 1Vpp Output
CALL FOR QUOTE

LS 106 / 106C Discontinued
Sealed Linear Encoders for Measuring Steps of 1 m and 0.5 m with 11uApp Output
CALL FOR QUOTE

LS 1679
Incremental Sealed Linear Encoder. Integrated wear-free roller guide with steel ball bearings on steel rod. Large mounting tolerances for connecting by coupling rod.
CALL FOR QUOTE

LS 176 / 176C Discontinued
Sealed Linear Encoders for Measuring Steps of 1 m and 0.5 m with 5v TTL Quadrature Output
CALL FOR QUOTE

LS 177 / 177C
Sealed Linear Encoders for Measuring Steps of 1 m and 0.5 m with 5v TTL Quadrature Output
CALL FOR QUOTE

LS 186 / 186C Discontinued
Sealed Linear Encoders for Measuring Steps of 1 m and 0.5 m with 1 Vpp Output
CALL FOR QUOTE

LS 187 / 187C
Incremental linear encoders for measurment to 0.5 m
CALL FOR QUOTE

LS 303 / 303C Discontinued
Slimline Sealed Linear Encoders for Measuring Steps of 10 m and 5 m with 11uApp Output
CALL FOR QUOTE

LS 323 / 323C Discontinued
Slimline Sealed Linear Encoders for Measuring Steps of 10 m and 5 m with 5v TTL Quadrature Output
CALL FOR QUOTE

LS 328 / 328C
Slimline linear encoder for limited installation space
CALL FOR QUOTE

LS 388 / 388C
Slimline linear encoder for limited installation space
CALL FOR QUOTE

LS 406 / 406C Discontinued
Sealed Linear Encoders for Measuring Steps of 1 m and 0.5 m with 11uApp Output
CALL FOR QUOTE

LS 476 / 476C Discontinued
Sealed Linear Encoders for Measuring Steps of 1 m and 0.5 m with 5v TTL Quadrature Output
CALL FOR QUOTE

LS 477 / 477C
Incremental Linear Encoder for Measuring Steps of 1 m and 0.5 m
CALL FOR QUOTE

LS 486 / 486C Discontinued
Sealed Linear Encoders for Measuring Steps of 1 m and 0.5 m with 1 Vpp Output
CALL FOR QUOTE

LS 487 / 487C
Incremental linear encoders for measuring steps of 1 m and 0.5 m
(0.00005 in. to 0.00002 in.)
CALL FOR QUOTE

LS 603 / 603C Discontinued
Sealed Linear Encoders for Measuring Steps of 10 m and 5 m with 11uApp Output
CALL FOR QUOTE

LS 623 / 623C Discontinued
Sealed Linear Encoders for Measuring Steps of 10 m and 5 m with 5v TTL Quadrature Output
CALL FOR QUOTE

LS 628 / 628C
Sealed Linear Encoders for Measuring Steps of 10 m and 5 m with 5v TTL Quadrature Output
CALL FOR QUOTE

LS 688 / 688C
Sealed Linear Encoders for Measuring Steps of 10 m with a 1Vpp output signal
CALL FOR QUOTE

Machining Accuracy
Machining Accuracy of Machine Tools
CALL FOR QUOTE

MT 101K
Length Gauge with 100mm measuring range
CALL FOR QUOTE

MT 101M
Motorized plunger actuation; constant gauging force, 100mm Measuring Range
CALL FOR QUOTE

MT 1201
Rugged standard version with ball-guided plunger for radial forces up to 0.8 N; Plunger actuation by cable lifter or contact
CALL FOR QUOTE

MT 1287
The METRO MT 1287 is a Length Gauge with high repeatability and features a mesuring range of 12 mm.
CALL FOR QUOTE

MT 2501
Rugged standard version like MT 1201, but for measuring ranges up to 25 mm (1 in.)
CALL FOR QUOTE

MT 2587
The METRO MT 2587 is a Length Gauge with high repeatability and features a mesuring range of 12 mm.
CALL FOR QUOTE

MT 60 K
Free-moving plunger for connection to moving elements by coupling
CALL FOR QUOTE

MT 60M
Motorized plunger actuation; constant gauging force, variable with three stages
CALL FOR QUOTE

ND 221B Discontinued
The ND 221 B is offered for simple tasks at measuring and testing stations, but also for position display on X-Y tables.
CALL FOR QUOTE

ND 231B Discontinued
The ND 231 B is designed for two encoders. It calculates the sum and the difference of two measured values and displays either value.
CALL FOR QUOTE

ND 280
HEIDENHAIN`s newest LCD display for measuring and inspection stations
CALL FOR QUOTE

ND 281B Discontinued
The ND 281 B serves as a universal display unit for linear and angular measurement with RS-232 Output.
CALL FOR QUOTE

ND 282B Discontinued
The ND 281 B serves as a universal display unit for linear and angular measurement with BCD Output.
CALL FOR QUOTE

ND 287
HEIDENHAIN`s newest LCD display for measuring and inspection stations. Replaced most of the older single axis inspection displays, such as the ND 281.
CALL FOR QUOTE

ND 522/523
The ND522/523 LCD displays for manual mills and lathes accept standard TTL signals.
CALL FOR QUOTE

ND 710/750 Discontinued
Basic 2 or 3 axis Display for Milling with Conversational Programming Support for the Operator.
CALL FOR QUOTE

ND 720/760 Discontinued
High Resolution 2 or 3 axis Display for Milling.
CALL FOR QUOTE

ND 730/770 Discontinued
High Resolution 2 or 3 axis Display for Lathes.
CALL FOR QUOTE

ND 780
The New ND Digital Readout Milling, Drilling and Boring, and Lathe Machines Up to 3 axis
CALL FOR QUOTE

ND1100 Quadra-Chek Series
Digital readouts for simple positioning tasks with up to 4 axes inputs
CALL FOR QUOTE

ND1200 Quadra-Chek Series
Digital readouts for optical comparators with up to 4 axes inputs.
CALL FOR QUOTE

ND1300 Quadra-Chek Series
Digital readouts for convenient 3-D measurement acquisition.
CALL FOR QUOTE

ND1400 Quadra-Chek Series
Digital readouts for Manual 2-D Measuring Machines
CALL FOR QUOTE

ND2100 Gage-Chek Series
Digital readouts for multipoint inspection apparatuses with up to 8 axes inputs
CALL FOR QUOTE

PP 201
Incremental two-coordinate encoder for measuring steps of 1um to 0.05um with 11uApp Output
CALL FOR QUOTE

PP 271
Incremental two-coordinate encoder for measuring steps of 1um to 0.05um with 5v TTL Quadrature Output
CALL FOR QUOTE

PP 281
Incremental two-coordinate encoder for measuring steps of 1um to 0.05um with 1Vpp Output
CALL FOR QUOTE

PT 855 Discontinued
Flat-Panel Position Display with Conversational
CALL FOR QUOTEProgramming and Graphic Support for up to 4 Axes

PT 880
The New POSITIP Display with conversational guidance and contextual help on a flat screen, graphic features, program memory, Up to 6 axis
CALL FOR QUOTE

RCN 2000
New absolute angle encoder with a 20mm through hole shaft, providing accuracies of either +/-5 arc seconds or +/-2.5 arc seconds. A laser calibration chart comes with this encoder.
CALL FOR QUOTE

RCN 223F
An RCN absolute angle encoder features an integral stator coupling which, in comparison with encoders with solid shaft and separate coupling
CALL FOR QUOTE

RCN 223M
An RCN absolute angle encoder features an integral stator coupling which, in comparison with encoders with solid shaft and separate coupling
CALL FOR QUOTE

RCN 226
Compact absolute angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0000054 with 1Vpp and EnDat Output
CALL FOR QUOTE

RCN 5000
New absolute angle encoder with a 35mm through hole shaft, providing accuracies of either +/-5 arc seconds or +/-2.5 arc seconds. A laser calibration chart comes with this encoder.
CALL FOR QUOTE

RCN 723 Discontinued
Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.000 05 with 1Vpp and EnDat Output
CALL FOR QUOTE

RCN 727F
An RCN absolute angle encoder features an integral stator coupling which, in comparison with encoders with solid shaft and separate coupling
CALL FOR QUOTE

RCN 729
An RCN absolute angle encoder features an integral stator coupling which, in comparison with encoders with solid shaft and separate coupling
CALL FOR QUOTE

RCN 8000
New absolute angle encoder with either a 60mm or 100mm through hole shaft, providing accuracies of either +/-5 arc seconds or +/-2.5 arc seconds. A laser calibration chart comes with this encoder.
CALL FOR QUOTE

RCN 823M Discontinued
An RCN absolute angle encoder features an integral stator coupling which, in comparison with encoders with solid shaft and separate coupling
CALL FOR QUOTE

RCN 827F
An RCN absolute angle encoder features an integral stator coupling which, in comparison with encoders with solid shaft and separate coupling
CALL FOR QUOTE

RCN 827M (Mitsubishi Interface)
A RCN 827M absolute angle encoder features an integral stator coupling which, in comparison with encoders with solid shaft and separate coupling
CALL FOR QUOTE

RCN 829
An RCN absolute angle encoder features an integral stator coupling which, in comparison with encoders with solid shaft and separate coupling
CALL FOR QUOTE

ROD 1020
Miniature incremental rotary encoder with integral bearing and separete chaft coupling with 5v TTL Quadrature output
CALL FOR QUOTE

ROD 1030
Miniature incremental rotary encoder with integral bearing and separete chaft coupling with 10v to 30v HTL Quadrature output
CALL FOR QUOTE

ROD 1050
Miniature incremental rotary encoder with integral bearing and separete chaft coupling with 11uApp output
CALL FOR QUOTE

ROD 1080
Miniature incremental rotary encoder with integral bearing and separete chaft coupling with 1Vpp output
CALL FOR QUOTE

ROD 250 Discontinued
Compact incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.0005 with 11uApp Output
CALL FOR QUOTE

ROD 260 Discontinued
Compact incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.005 with 5v TTL Quadrature Output
CALL FOR QUOTE

ROD 270
Compact incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.001 with 5v TTL Quadrature Output and integrated 5x interpolation
CALL FOR QUOTE

ROD 280
Compact incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.0005 with 1Vpp Output
CALL FOR QUOTE

ROD 282 Discontinued
Compact incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.0001 with 1Vpp Output
CALL FOR QUOTE

ROD 420
Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 5v TTL Quadrature output and clamping flange
CALL FOR QUOTE

ROD 426
Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 5v TTL Quadrature output and synchro flange
CALL FOR QUOTE

ROD 430
Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 10v to 30v HTL Quadrature output and clamping flange
CALL FOR QUOTE

ROD 436
Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 10v to 30v HTL Quadrature output and synchro flange
CALL FOR QUOTE

ROD 450
Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 11uApp output and clamping flange
CALL FOR QUOTE

ROD 456
Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 11uApp output and synchro flange
CALL FOR QUOTE

ROD 466
Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 10v to 30v TTL Quadrature output and synchro flange
CALL FOR QUOTE

ROD 480
Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 1Vpp output and clamping flange
CALL FOR QUOTE

ROD 486
Industrial standard incremental rotary encoder with integral bearing and separete chaft coupling with 1Vpp output and synchro flange
CALL FOR QUOTE

ROD 700 Discontinued
Large incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.000 05 with 11uApp Output
CALL FOR QUOTE

ROD 780
Large incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.000 05 with 1Vpp Output
CALL FOR QUOTE

ROD 800 Discontinued
Large ultra high accuracy incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.000 05 with 11uApp Output
CALL FOR QUOTE

ROD 880
Large ultra high accuracy incremental angle encoder with integral bearing for separate shaft coupling for measuring steps to 0.000 05 with 1Vpp Output
CALL FOR QUOTE

RON 225
Compact incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.005 with 5v TTL Quadrature Output
CALL FOR QUOTE

RON 255 Discontinued
Compact incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0005 with 11uApp Output
CALL FOR QUOTE

RON 275
Compact incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.001 with 5v TTL Quadrature Output and 5x integrated interpolation
CALL FOR QUOTE

RON 285
Compact incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0005 with 1Vpp Output
CALL FOR QUOTE

RON 287
Compact incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0001 with 1Vpp Output
CALL FOR QUOTE

RON 705 Discontinued
Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0001 with 11uApp Output
CALL FOR QUOTE

RON 706 Discontinued
Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0001 with 11uApp Output
CALL FOR QUOTE

RON 785
Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0001 with 1Vpp Output
CALL FOR QUOTE

RON 786
Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.0001 with 1Vpp Output
CALL FOR QUOTE

RON 806 Discontinued
Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.000 05 with 11uApp Output
CALL FOR QUOTE

RON 886
Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.000 05 with 1Vpp Output
CALL FOR QUOTE

RON 905
Large incremental angle encoder with integral bearing and integrated stator coupling for measuring steps to 0.000 01 with 11uApp Output
CALL FOR QUOTE

RPN 886
RPN Angle encoder with integral bearing, hollow shaft and integrated stator coupling
CALL FOR QUOTE

ST 1201 Discontinued
Incremental length gauge for multipoint inspection apparatus. Measuring range 12 mm
CALL FOR QUOTE

ST 1207
Incremental length gauge for multipoint inspection apparatus. Measuring range 12 mm
CALL FOR QUOTE

ST 1208
Incremental length gauge for multipoint inspection apparatus. Measuring range 12 mm
CALL FOR QUOTE

ST 1277
Incremental length gauge for multipoint inspection apparatus. Measuring range 12 mm
CALL FOR QUOTE

ST 1278
Incremental length gauge for multipoint inspection apparatus. Measuring range 12 mm
CALL FOR QUOTE

ST 1287
Incremental length gauge for multipoint inspection apparatus. Measuring range 12 mm
CALL FOR QUOTE

ST 1288
Incremental length gauge for multipoint inspection apparatus. Measuring range 12 mm
CALL FOR QUOTE

ST 3007
Incremental length gauge for multipoint inspection apparatus. Measuring range 30 mm
CALL FOR QUOTE

ST 3008
Incremental length gauge for multipoint inspection apparatus. Measuring range 30 mm
CALL FOR QUOTE

ST 3077
Incremental length gauge for multipoint inspection apparatus. Measuring range 30 mm
CALL FOR QUOTE

ST 3078
Incremental length gauge for multipoint inspection apparatus. Measuring range 30 mm
CALL FOR QUOTE

ST 3087
Incremental length gauge for multipoint inspection apparatus. Measuring range 30 mm
CALL FOR QUOTE

ST 3088
Incremental length gauge for multipoint inspection apparatus. Measuring range 30 mm
CALL FOR QUOTE

TS 220
TS 220 Workpiece Touch Probe with cable connection
CALL FOR QUOTE

TS 230
TS 230 Workpiece Touch Probe with cable connection
CALL FOR QUOTE

TS 440
TS 440 Workpiece Touch Probe with infrared transmission
CALL FOR QUOTE

TS 640
TS 640 Workpiece Touch Probe with infrared transmission
CALL FOR QUOTE

TT 130
TT 130 Tool Touch Probe fastening with fixing clamps or mounting base (available as an accessory)
CALL FOR QUOTE

VM 182
The VM 182 Comparator System is for measuring the positioning accuracy, repeatability, and guideway error of linear axes on manual and CNC-controlled machines
CALL FOR QUOTE